Directions for Use and Application Rate for Bactipost™

Area Coverage:

Application Area: 1,000 square meters with maximum depth of 1 meter.

Preparation:

• Dissolve 20-40 grams of Bactipost™ in 20 liters of water.

Application:

Direct Application:

• Apply the dissolved Bactipost™ solution directly into the pond.

Application Rate Adjustment:

• The application rate may vary depending on the level of organic accumulation in the pond system.
• Monitor the pond's conditions and adjust the application rate accordingly.

Guidelines:

• Alkalinity: Ensure that the pond's alkalinity is maintained above 180 ppm.

Reapplication:

• If necessary, repeat the same application rate the next day to maintain desired conditions.

Monitoring:

• Regularly check for mineral levels (e.g., Ca+, Mg+, K+) and conduct vibrio plate counts before and after application to assess the pond's health and water quality. 

Summary:

Dissolve 20-40 grams of Bactipost™ in 20 liters of water and apply directly into the pond, covering an area of 1,000 square meters with up to 1 meter of water depth. Adjust the application rate based on organic accumulation and ensure alkalinity remains above 180 ppm. Reapply as needed and monitor mineral levels and vibrio counts for optimal pond health.

AQUAMIMICRY^_® offers a comprehensive and effective protocol for addressing mineral fluctuations in aquaculture systems. By enhancing mineral recovery, reducing organic load, improving water capacity, and promoting clearer water, AQUAMIMICRY^_® ensures a healthier and more stable aquatic environment. Integrating AQUAMIMICRY^_® into your aquaculture management practices ensures better shrimp health, reduced stress, and higher productivity, making it the ultimate solution for mineral fluctuations problems in aquaculture systems.