Direct Application Rate for Bactipost™

Area Coverage:

Application Area:

• 1,000 square meter with maximum depth of 1 meter.

Direct Application Instructions:

Preparation:

• Dissolve 20-40 grams of Bactipost™ in 20 liters of water.

Application:

Apply the dissolved Bactipost™ solution directly into the pond.

Application Rate Adjustment:

• The application rate may vary depending on the level of organic accumulation in the pond system.
• Monitor the pond's conditions and adjust the application rate accordingly.

Optional Application Rates:

For Intensive Culture:

Area Coverage: 

1,000 square meters with maximum depth of 1 meter.

Application Rate: 

• 5 ppm

Ingredients:

• Wheat Flour:  5 kg (5 ppm)
• Bactipost™: 50 ml (10 ml per 1 kg of wheat flour)
• NaHCO3:       500 gram (10% based on the total weight of wheat flour)
• Water:            20 liters

Fermentation:

• Ferment the mixture for at least 24 hours, stirring occasionally.
• Filter well and broadcast the liquid throughout the pond while aeration is on.
• Repeat the process until the ammonia level is reduced.

For Extensive Culture:

Area Coverage: 

1,000 square meter with maximum depth of 1 meter.

Application Rate: 1 ppm

Ingredients:

• Wheat Flour:  1 kg (1 ppm)
• Bactipost™: 10 ml (10 ml per 1 kg of wheat flour)
• NaHCO3:       100 gram (10% based on the total weight of rice bran)
• Water:            4 liters

Fermentation:

• Ferment the mixture for at least 24 hours, stirring occasionally.
• Filter well and broadcast the liquid throughout the pond while aeration is on.
• Repeat the process until the ammonia level is reduced.

General Guidelines:

Alkalinity: 

• Ensure the pond's alkalinity is maintained above 180 ppm.

 Reapplication:

• If necessary, repeat the same application rate the next day.

Monitoring:

• Regularly check for mineral levels (e.g., Ca+, Mg+, K+) and conduct vibrio plate counts before and after application.

Summary:

Dissolve 20-40 grams of Bactipost™ in 20 liters of water and apply directly to ponds with a maximum water depth of 1 meter, treating 1,000 cubic meters of pond water. Adjust the application rate based on organic accumulation levels. For intensive culture, use 5 kg of wheat flour with 50 ml of Bactipost™ and 20 liters of water; for extensive culture, use 1 kg of wheat flour with 10 ml of Bactipost™ and 4 liters of water. Ferment for 24 hours, filter, and broadcast while aerating, ensuring alkalinity remains above 180 ppm. Repeat as needed and monitor mineral levels and vibrio counts.

AQUAMIMICRY^_® offers a comprehensive and effective protocol for addressing ammonia spikes in aquaculture systems. By reducing toxic ammonia levels, promoting nitrifying bacteria growth, improving water capacity, and enhancing water transparency, AQUAMIMICRY^_® ensures a healthier and more stable aquatic environment. Integrating AQUAMIMICRY^_® into your aquaculture management practices ensures better shrimp health, reduced stress, and higher productivity, making it the ultimate solution for ammonia spikes in aquaculture systems.