| Product
Specifications:
Biozyme®
contains powerful waste digesting enzymes, essential
nutrients and specifically selected strains of enzymes producing
bacteria to degrade all the principle organic constituents normally
found in food processing wastewater treatment facilities.
Advantages:
• Reduces BOD, COD and SS in final effluent of food wastewater
treatment systems.
• Rapid recovery time from upsets.
• Improves settling of floc formation in the final clarifier.
• Improves waste degradation of specific target compounds.
• Increases the wastewater treatment systems capacity.
• Enable to absorb the shock of toxic influent.
• Enhances the stability of wastewater treatment systems.
• Enhances odor control through natural organic acid oxidation.
• Environmental friendly, biodegradable component for broader
activity spectrum.
Direction
for use and application rate:
Initial treatment of any waste system should be four times the volume
of Biozyme®
required for normal preventative maintenance. As a general
rule, normal preventative maintenance is 2 ppm of Biozyme®
per day, determined by the total weight of the wastewater
in the system.
Example:
In a 100 cum3 food processing wastewater treatment plant systems,
multiply 100 cum3 by 1,000 liter/cum3 by 1 kg per liter by 2 parts
and divided by 1 000 000. This equals 200 g of Biozyme®
per
day to be used for normal preventative maintenance treatment.
100 cum3 x 1 000 liter/cum3 x 1 kg/l x 2 parts = 200 g/day
1 000 000
Flow
rate can also be used to determine the volume of Biozyme®
required for normal preventative maintenance. Calculate
the weight of the total organic contaminated wastewater flowing
into the waste treatment system and add 5 to 10 ppm
of Biozyme®
by weight. During normal maintenance program, the point of application
should be in an area which allows the product the maximum time in
the system
These
normal preventative maintenance rates are based upon:
• BOD ranges of 250 to 500 mg/l
• Minimum retention of 1 day.
• pH of 6.5 to 7.5
• Maximum water depth of 3 meters
• Negative effects on biological growth rates are possible
in the presence of varying concentrations of heavy metal in the
mix liquor solution. i.e. mercury, hexavalent chromium and inorganic
cyanide wastes.
| Physical
characteristics: |
| Appearance: |
Medium
tan, free flowing powder with fermented odor. |
| Effective
temperature: |
Min.
10, - 60 °C |
| Effective
pH range: |
Min.
5.0 - 9.0 |
| Effective
dissolve oxygen (DO): |
Min.
2, Max. 3 |
| Carbon/Nitrogen: |
Min.
10:1, Max. 20:1 |
| Shelf
life: |
Min.
2 years |
| Do
not use in the presence of acids or caustics. |
Storage
condition:
For optimal shelf life, the product is best stored in cool areas
under 38 °C. Do not direct in sunlight. Keep container tightly
closed when the product is not being removed the container.
Precaution:
See above storage conditions. Keep out of reach of children.
Package
size:
500 grams per bottle, 12, 32 bottles per carton and 40 kilogram
drum.
Option:
Private labeling is also available.
[
Top ]
|
